Self-aligning ball bearing · 12 series
1210 bearing
50 × 90 × 20 mm
The 1210 is a self-aligning ball bearing with a 50 mm bore, 90 mm outside diameter and 20 mm width. Light series, same envelope as 62xx.
- Bore d
- 50 mm 1.9685 in
- Outside diameter D
- 90 mm 3.5433 in
- Width B
- 20 mm 0.7874 in
- Dimension series
- 02
- Load directions
- Mainly radial; light axial
Designation explained
What 1210 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
1 | Self-aligning ball bearing |
2 | Diameter series 2, dimension series 02 |
10 | 10 → 50 mm bore (10 × 5) |
Variants
Common 1210 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
K | 1210K | Tapered bore (taper 1:12) for mounting on an adapter or withdrawal sleeve |
2RS | 1210-2RS | Contact seals on both sides (available for selected sizes; may be wider) |
TV / TN9 / M | 1210-TVH | Cage material: polyamide (TV, TN9) or machined brass (M) — letters vary by maker |
CN (no suffix) | 1210 | Normal internal clearance |
C3 | 1210-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | 1210-C4 | Internal clearance greater than C3 |
Same envelope
Same 50 × 90 × 20 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 50 mm bore bearings
Every standard bearing in this reference with a 50 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6010 | Deep groove ball bearing | 80 mm | 16 mm |
| 6310 | Deep groove ball bearing | 110 mm | 27 mm |
| 6410 | Deep groove ball bearing | 130 mm | 31 mm |
| 61810 | Deep groove ball bearing | 65 mm | 7 mm |
| 61910 | Deep groove ball bearing | 72 mm | 12 mm |
| 16010 | Deep groove ball bearing | 80 mm | 10 mm |
| 1310 | Self-aligning ball bearing | 110 mm | 27 mm |
| 2210 | Self-aligning ball bearing | 90 mm | 23 mm |
| 2310 | Self-aligning ball bearing | 110 mm | 40 mm |
| 7310 | Angular contact ball bearing | 110 mm | 27 mm |
| NU310 | Cylindrical roller bearing | 110 mm | 27 mm |
| NU2210 | Cylindrical roller bearing | 90 mm | 23 mm |
| NU2310 | Cylindrical roller bearing | 110 mm | 40 mm |
| 22210 | Spherical roller bearing | 90 mm | 23 mm |
| 22310 | Spherical roller bearing | 110 mm | 40 mm |
| 30210 | Tapered roller bearing | 90 mm | 21.75 mm |
| 30310 | Tapered roller bearing | 110 mm | 29.25 mm |
| 32010X | Tapered roller bearing | 80 mm | 20 mm |
| 32210 | Tapered roller bearing | 90 mm | 24.75 mm |
| 32310 | Tapered roller bearing | 110 mm | 42.25 mm |
| 51110 | Thrust ball bearing | 70 mm | 14 mm |
| 51210 | Thrust ball bearing | 78 mm | 22 mm |
| 51310 | Thrust ball bearing | 95 mm | 31 mm |
| UCP210 | Pillow block bearing unit | — | — |
Where to buy
Find 1210 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 02, and are the same for every manufacturer of a standard 1210. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a 1210 bearing?
A 1210 is a self-aligning ball bearing with a 50 mm bore, 90 mm outside diameter and 20 mm width (50 × 90 × 20 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Can I replace 1210 with another bearing of the same size?
Other bearing types can share the same 50 × 90 × 20 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need 1210 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.