Self-aligning ball bearing · 22 series (wide)
2216 bearing
80 × 140 × 33 mm
The 2216 is a self-aligning ball bearing with a 80 mm bore, 140 mm outside diameter and 33 mm width. Wider version of the 12 series.
- Bore d
- 80 mm 3.1496 in
- Outside diameter D
- 140 mm 5.5118 in
- Width B
- 33 mm 1.2992 in
- Dimension series
- 22
- Load directions
- Mainly radial; light axial
Designation explained
What 2216 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
22 | Wide self-aligning ball bearing, dimension series 22 (the type digit 1 is omitted by convention) |
16 | 16 → 80 mm bore (16 × 5) |
Variants
Common 2216 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
K | 2216K | Tapered bore (taper 1:12) for mounting on an adapter or withdrawal sleeve |
2RS | 2216-2RS | Contact seals on both sides (available for selected sizes; may be wider) |
TV / TN9 / M | 2216-TVH | Cage material: polyamide (TV, TN9) or machined brass (M) — letters vary by maker |
CN (no suffix) | 2216 | Normal internal clearance |
C3 | 2216-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | 2216-C4 | Internal clearance greater than C3 |
Same envelope
Same 80 × 140 × 33 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 80 mm bore bearings
Every standard bearing in this reference with a 80 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6016 | Deep groove ball bearing | 125 mm | 22 mm |
| 6216 | Deep groove ball bearing | 140 mm | 26 mm |
| 6316 | Deep groove ball bearing | 170 mm | 39 mm |
| 6416 | Deep groove ball bearing | 200 mm | 48 mm |
| 61816 | Deep groove ball bearing | 100 mm | 10 mm |
| 61916 | Deep groove ball bearing | 110 mm | 16 mm |
| 16016 | Deep groove ball bearing | 125 mm | 14 mm |
| 1216 | Self-aligning ball bearing | 140 mm | 26 mm |
| 1316 | Self-aligning ball bearing | 170 mm | 39 mm |
| 2316 | Self-aligning ball bearing | 170 mm | 58 mm |
| 7216 | Angular contact ball bearing | 140 mm | 26 mm |
| 7316 | Angular contact ball bearing | 170 mm | 39 mm |
| NU216 | Cylindrical roller bearing | 140 mm | 26 mm |
| NU316 | Cylindrical roller bearing | 170 mm | 39 mm |
| NU2316 | Cylindrical roller bearing | 170 mm | 58 mm |
| 22316 | Spherical roller bearing | 170 mm | 58 mm |
| 30216 | Tapered roller bearing | 140 mm | 28.25 mm |
| 30316 | Tapered roller bearing | 170 mm | 42.5 mm |
| 32016X | Tapered roller bearing | 125 mm | 29 mm |
| 32216 | Tapered roller bearing | 140 mm | 35.25 mm |
| 32316 | Tapered roller bearing | 170 mm | 61.5 mm |
| 51116 | Thrust ball bearing | 105 mm | 19 mm |
| 51216 | Thrust ball bearing | 115 mm | 28 mm |
| 51316 | Thrust ball bearing | 140 mm | 44 mm |
| UCP216 | Pillow block bearing unit | — | — |
Where to buy
Find 2216 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 22, and are the same for every manufacturer of a standard 2216. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a 2216 bearing?
A 2216 is a self-aligning ball bearing with a 80 mm bore, 140 mm outside diameter and 33 mm width (80 × 140 × 33 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Can I replace 2216 with another bearing of the same size?
Other bearing types can share the same 80 × 140 × 33 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need 2216 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.