Cylindrical roller bearing · NU23 series
NU2317 bearing
85 × 180 × 60 mm
The NU2317 is a cylindrical roller bearing with a 85 mm bore, 180 mm outside diameter and 60 mm width. NJ2317, NUP2317 share these boundary dimensions with a different flange arrangement. Wide medium series; NJ23 and NUP23 share these dimensions.
- Bore d
- 85 mm 3.3465 in
- Outside diameter D
- 180 mm 7.0866 in
- Width B
- 60 mm 2.3622 in
- Dimension series
- 23
- Load directions
- High radial; NJ/NUP limited axial
Designation explained
What NU2317 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
NU | Cylindrical roller bearing, two flanges on the outer ring, none on the inner ring (NJ, NUP and N are other flange arrangements) |
23 | Dimension series 23 |
17 | 17 → 85 mm bore (17 × 5) |
Variants
Common NU2317 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
NJ / NUP / N | NJ2317 | Other flange arrangements with the same d × D × B — they locate the shaft differently and are not interchangeable without checking |
E / EC | NU2317E | Reinforced internal design with more or larger rollers (higher load rating) |
M / P / J | NU2317-E-M1 | Cage: brass (M), polyamide (P / TVP) or pressed steel (J) |
CN (no suffix) | NU2317 | Normal internal clearance |
C3 | NU2317-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | NU2317-C4 | Internal clearance greater than C3 |
Same envelope
Same 85 × 180 × 60 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 85 mm bore bearings
Every standard bearing in this reference with a 85 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6017 | Deep groove ball bearing | 130 mm | 22 mm |
| 6217 | Deep groove ball bearing | 150 mm | 28 mm |
| 6317 | Deep groove ball bearing | 180 mm | 41 mm |
| 6417 | Deep groove ball bearing | 210 mm | 52 mm |
| 61817 | Deep groove ball bearing | 110 mm | 13 mm |
| 61917 | Deep groove ball bearing | 120 mm | 18 mm |
| 1217 | Self-aligning ball bearing | 150 mm | 28 mm |
| 1317 | Self-aligning ball bearing | 180 mm | 41 mm |
| 2217 | Self-aligning ball bearing | 150 mm | 36 mm |
| 7217 | Angular contact ball bearing | 150 mm | 28 mm |
| 7317 | Angular contact ball bearing | 180 mm | 41 mm |
| NU217 | Cylindrical roller bearing | 150 mm | 28 mm |
| NU317 | Cylindrical roller bearing | 180 mm | 41 mm |
| NU2217 | Cylindrical roller bearing | 150 mm | 36 mm |
| 22217 | Spherical roller bearing | 150 mm | 36 mm |
| 30217 | Tapered roller bearing | 150 mm | 30.5 mm |
| 30317 | Tapered roller bearing | 180 mm | 44.5 mm |
| 32017X | Tapered roller bearing | 130 mm | 29 mm |
| 32217 | Tapered roller bearing | 150 mm | 38.5 mm |
| 51117 | Thrust ball bearing | 110 mm | 19 mm |
| 51217 | Thrust ball bearing | 125 mm | 31 mm |
| 51317 | Thrust ball bearing | 150 mm | 49 mm |
| UCP217 | Pillow block bearing unit | — | — |
Where to buy
Find NU2317 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 23, and are the same for every manufacturer of a standard NU2317. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a NU2317 bearing?
A NU2317 is a cylindrical roller bearing with a 85 mm bore, 180 mm outside diameter and 60 mm width (85 × 180 × 60 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Is NJ2317 the same as NU2317?
NJ2317, NUP2317 have the same bore, outside diameter and width as NU2317, but different ring flanges. They guide the shaft axially in different ways, so swapping them changes how the arrangement works.
Can I replace NU2317 with another bearing of the same size?
Other bearing types can share the same 85 × 180 × 60 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need NU2317 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.