Cylindrical roller bearing · NU3 series
NU305 bearing
25 × 62 × 17 mm
The NU305 is a cylindrical roller bearing with a 25 mm bore, 62 mm outside diameter and 17 mm width. NJ305, NUP305, N305 share these boundary dimensions with a different flange arrangement. Medium series; NJ3, NUP3 and N3 share these dimensions.
- Bore d
- 25 mm 0.9843 in
- Outside diameter D
- 62 mm 2.4409 in
- Width B
- 17 mm 0.6693 in
- Dimension series
- 03
- Load directions
- High radial; NJ/NUP limited axial
Designation explained
What NU305 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
NU | Cylindrical roller bearing, two flanges on the outer ring, none on the inner ring (NJ, NUP and N are other flange arrangements) |
3 | Dimension series 03 |
05 | 05 → 25 mm bore (05 × 5) |
Variants
Common NU305 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
NJ / NUP / N | NJ305 | Other flange arrangements with the same d × D × B — they locate the shaft differently and are not interchangeable without checking |
E / EC | NU305E | Reinforced internal design with more or larger rollers (higher load rating) |
M / P / J | NU305-E-M1 | Cage: brass (M), polyamide (P / TVP) or pressed steel (J) |
CN (no suffix) | NU305 | Normal internal clearance |
C3 | NU305-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | NU305-C4 | Internal clearance greater than C3 |
Same envelope
Same 25 × 62 × 17 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 25 mm bore bearings
Every standard bearing in this reference with a 25 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6005 | Deep groove ball bearing | 47 mm | 12 mm |
| 6205 | Deep groove ball bearing | 52 mm | 15 mm |
| 6405 | Deep groove ball bearing | 80 mm | 21 mm |
| 61805 | Deep groove ball bearing | 37 mm | 7 mm |
| 61905 | Deep groove ball bearing | 42 mm | 9 mm |
| 16005 | Deep groove ball bearing | 47 mm | 8 mm |
| 1205 | Self-aligning ball bearing | 52 mm | 15 mm |
| 2205 | Self-aligning ball bearing | 52 mm | 18 mm |
| 2305 | Self-aligning ball bearing | 62 mm | 24 mm |
| 7205 | Angular contact ball bearing | 52 mm | 15 mm |
| NU205 | Cylindrical roller bearing | 52 mm | 15 mm |
| NU2205 | Cylindrical roller bearing | 52 mm | 18 mm |
| NU2305 | Cylindrical roller bearing | 62 mm | 24 mm |
| 22205 | Spherical roller bearing | 52 mm | 18 mm |
| 30205 | Tapered roller bearing | 52 mm | 16.25 mm |
| 30305 | Tapered roller bearing | 62 mm | 18.25 mm |
| 32005X | Tapered roller bearing | 47 mm | 15 mm |
| 32205 | Tapered roller bearing | 52 mm | 19.25 mm |
| 32305 | Tapered roller bearing | 62 mm | 25.25 mm |
| 51105 | Thrust ball bearing | 42 mm | 11 mm |
| 51205 | Thrust ball bearing | 47 mm | 15 mm |
| 51305 | Thrust ball bearing | 52 mm | 18 mm |
| UCP205 | Pillow block bearing unit | — | — |
Where to buy
Find NU305 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 03, and are the same for every manufacturer of a standard NU305. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a NU305 bearing?
A NU305 is a cylindrical roller bearing with a 25 mm bore, 62 mm outside diameter and 17 mm width (25 × 62 × 17 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Is NJ305 the same as NU305?
NJ305, NUP305, N305 have the same bore, outside diameter and width as NU305, but different ring flanges. They guide the shaft axially in different ways, so swapping them changes how the arrangement works.
Can I replace NU305 with another bearing of the same size?
Other bearing types can share the same 25 × 62 × 17 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need NU305 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.