Self-aligning ball bearing · 22 series (wide)
2220 bearing
100 × 180 × 46 mm
The 2220 is a self-aligning ball bearing with a 100 mm bore, 180 mm outside diameter and 46 mm width. Wider version of the 12 series.
- Bore d
- 100 mm 3.937 in
- Outside diameter D
- 180 mm 7.0866 in
- Width B
- 46 mm 1.811 in
- Dimension series
- 22
- Load directions
- Mainly radial; light axial
Designation explained
What 2220 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
22 | Wide self-aligning ball bearing, dimension series 22 (the type digit 1 is omitted by convention) |
20 | 20 → 100 mm bore (20 × 5) |
Variants
Common 2220 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
K | 2220K | Tapered bore (taper 1:12) for mounting on an adapter or withdrawal sleeve |
2RS | 2220-2RS | Contact seals on both sides (available for selected sizes; may be wider) |
TV / TN9 / M | 2220-TVH | Cage material: polyamide (TV, TN9) or machined brass (M) — letters vary by maker |
CN (no suffix) | 2220 | Normal internal clearance |
C3 | 2220-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | 2220-C4 | Internal clearance greater than C3 |
Same envelope
Same 100 × 180 × 46 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 100 mm bore bearings
Every standard bearing in this reference with a 100 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6020 | Deep groove ball bearing | 150 mm | 24 mm |
| 6220 | Deep groove ball bearing | 180 mm | 34 mm |
| 6320 | Deep groove ball bearing | 215 mm | 47 mm |
| 61820 | Deep groove ball bearing | 125 mm | 13 mm |
| 61920 | Deep groove ball bearing | 140 mm | 20 mm |
| 1220 | Self-aligning ball bearing | 180 mm | 34 mm |
| 1320 | Self-aligning ball bearing | 215 mm | 47 mm |
| 2320 | Self-aligning ball bearing | 215 mm | 73 mm |
| 7220 | Angular contact ball bearing | 180 mm | 34 mm |
| 7320 | Angular contact ball bearing | 215 mm | 47 mm |
| NU220 | Cylindrical roller bearing | 180 mm | 34 mm |
| NU320 | Cylindrical roller bearing | 215 mm | 47 mm |
| NU2320 | Cylindrical roller bearing | 215 mm | 73 mm |
| 22320 | Spherical roller bearing | 215 mm | 73 mm |
| 30220 | Tapered roller bearing | 180 mm | 37 mm |
| 30320 | Tapered roller bearing | 215 mm | 51.5 mm |
| 32020X | Tapered roller bearing | 150 mm | 32 mm |
| 32220 | Tapered roller bearing | 180 mm | 49 mm |
| 51120 | Thrust ball bearing | 135 mm | 25 mm |
| 51220 | Thrust ball bearing | 150 mm | 38 mm |
| 51320 | Thrust ball bearing | 170 mm | 55 mm |
Where to buy
Find 2220 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 22, and are the same for every manufacturer of a standard 2220. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a 2220 bearing?
A 2220 is a self-aligning ball bearing with a 100 mm bore, 180 mm outside diameter and 46 mm width (100 × 180 × 46 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Can I replace 2220 with another bearing of the same size?
Other bearing types can share the same 100 × 180 × 46 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need 2220 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.