Cylindrical roller bearing · NU2 series
NU220 bearing
100 × 180 × 34 mm
The NU220 is a cylindrical roller bearing with a 100 mm bore, 180 mm outside diameter and 34 mm width. NJ220, NUP220, N220 share these boundary dimensions with a different flange arrangement. Light series; NJ2, NUP2 and N2 share these dimensions.
- Bore d
- 100 mm 3.937 in
- Outside diameter D
- 180 mm 7.0866 in
- Width B
- 34 mm 1.3386 in
- Dimension series
- 02
- Load directions
- High radial; NJ/NUP limited axial
Designation explained
What NU220 means
Standard bearing numbers encode the type, the dimension series and the bore. Anything after the base number — seals, clearance, cage — is a suffix.
| Part | Meaning |
|---|---|
NU | Cylindrical roller bearing, two flanges on the outer ring, none on the inner ring (NJ, NUP and N are other flange arrangements) |
2 | Dimension series 02 |
20 | 20 → 100 mm bore (20 × 5) |
Variants
Common NU220 variants
Suffixes change the bearing without changing its boundary dimensions. The exact letters differ between manufacturers — always order by the full designation from the maker you choose.
| Suffix | Example | Meaning |
|---|---|---|
NJ / NUP / N | NJ220 | Other flange arrangements with the same d × D × B — they locate the shaft differently and are not interchangeable without checking |
E / EC | NU220E | Reinforced internal design with more or larger rollers (higher load rating) |
M / P / J | NU220-E-M1 | Cage: brass (M), polyamide (P / TVP) or pressed steel (J) |
CN (no suffix) | NU220 | Normal internal clearance |
C3 | NU220-C3 | Internal clearance greater than normal — common for electric motors and heated shafts |
C4 | NU220-C4 | Internal clearance greater than C3 |
Same envelope
Same 100 × 180 × 34 mm, different type
These bearings have exactly the same bore, outside diameter and width but are a different type. They fit the same housing and shaft, but carry loads differently — same size is not the same function.
Same bore
Other 100 mm bore bearings
Every standard bearing in this reference with a 100 mm bore, from light to heavy sections.
| Designation | Type | D | B / H |
|---|---|---|---|
| 6020 | Deep groove ball bearing | 150 mm | 24 mm |
| 6320 | Deep groove ball bearing | 215 mm | 47 mm |
| 61820 | Deep groove ball bearing | 125 mm | 13 mm |
| 61920 | Deep groove ball bearing | 140 mm | 20 mm |
| 1320 | Self-aligning ball bearing | 215 mm | 47 mm |
| 2220 | Self-aligning ball bearing | 180 mm | 46 mm |
| 2320 | Self-aligning ball bearing | 215 mm | 73 mm |
| 7320 | Angular contact ball bearing | 215 mm | 47 mm |
| NU320 | Cylindrical roller bearing | 215 mm | 47 mm |
| NU2220 | Cylindrical roller bearing | 180 mm | 46 mm |
| NU2320 | Cylindrical roller bearing | 215 mm | 73 mm |
| 22220 | Spherical roller bearing | 180 mm | 46 mm |
| 22320 | Spherical roller bearing | 215 mm | 73 mm |
| 30220 | Tapered roller bearing | 180 mm | 37 mm |
| 30320 | Tapered roller bearing | 215 mm | 51.5 mm |
| 32020X | Tapered roller bearing | 150 mm | 32 mm |
| 32220 | Tapered roller bearing | 180 mm | 49 mm |
| 51120 | Thrust ball bearing | 135 mm | 25 mm |
| 51220 | Thrust ball bearing | 150 mm | 38 mm |
| 51320 | Thrust ball bearing | 170 mm | 55 mm |
Where to buy
Find NU220 at sellers
Search results on independent sellers. We are not affiliated with them, do not earn from these links and do not see their prices or stock. Results mix brands and variants — check the full designation before you order.
About these dimensions. Boundary dimensions follow ISO 15 (radial bearings — boundary dimensions, general plan), dimension series 02, and are the same for every manufacturer of a standard NU220. Chamfers, load ratings, speed limits and weight depend on the manufacturer and design and are not shown — use the maker's datasheet for engineering decisions. Last checked 9 October 2026. Spotted an error? Tell us.
Learn more
What size is a NU220 bearing?
A NU220 is a cylindrical roller bearing with a 100 mm bore, 180 mm outside diameter and 34 mm width (100 × 180 × 34 mm). These boundary dimensions follow the ISO dimension plan, so they are the same across manufacturers.
Is NJ220 the same as NU220?
NJ220, NUP220, N220 have the same bore, outside diameter and width as NU220, but different ring flanges. They guide the shaft axially in different ways, so swapping them changes how the arrangement works.
Can I replace NU220 with another bearing of the same size?
Other bearing types can share the same 100 × 180 × 34 mm envelope, but a different type has different load directions, speed limits and mounting needs. Same dimensions alone do not make two bearings interchangeable.
Where are the load ratings and speed limits?
They depend on the manufacturer and internal design, so we do not list a single value. Check the datasheet for the exact full designation you intend to use.
Need NU220 data for a whole catalog?
We can help with that.
Normalized specifications, variants and supplier listings for every bearing you sell, with the source behind each value.